Please ensure Javascript is enabled for purposes ofwebsite accessibility
 30 Day Money Back Guarantee
Home Canning Supplies : Canning Jar Bands, Caps & Lids : Tattler Wide Canning Lids
Spacer Line

Tattler Wide Canning Lids

Tattler Wide Canning Lids
Click image to zoom


Add to Cart

Item Number: OPC1DOZWIDE

Introducing a set of 12 reusable rubber canning rings paired with BPA-free lids designed for wide mouth jars. These Tattler Canning Lids offer a sustainable alternative to conventional metal lids, with a unique two-piece design featuring a rubber gasket ring.
To ensure optimal performance during processing, Tattler Lids require a slight adjustment from traditional metal lids. It's important to allow these lids to remain slightly loose during processing to enable the jar to release built-up pressure.
A helpful tip: before processing, place the jar on a smooth surface and gently apply your index finger to the lid while tightening the metal band. Continue tightening until the jar begins to spin on the counter — indicating the perfect level of tightness for processing.

Looking for extra Tattler rubbers? click here   Looking for regular mouth Tattler lids? Click here

From Tattler
Tattler Reusable Canning Lid Usage
Tattler Lids do require a bit of variation from conventional metal lids. Being a two piece combination with a rubber gasket ring, Tattler Lids must remain a bit loose during processing in order for the jar to vent the pressure that has built in the jar during processing. An online customer gave us a very good tip on how tight is 'Just Right'. To get the feel for the correct tightness prior to processing, place the jar on a counter top or other smooth surface, then place your index finger on the lid (do not apply too much pressure while tightening the metal band). Screw the metal band on until the jar begins to spin on the counter top (or other smooth surface). This is the perfect tightness for processing!

The Following Final Step Is Crucial To Ensure A Good Seal:
Once the process is completed and the jars are removed from your canner, Let the bubbling die down (approximately 4-5 minutes), as this is pressure still releasing from the jars. Place a towel over the still hot jars (for safety) and finish tightening the metal bands. Now, let your jars cool naturally and when cool to room temperature, remove the metal band and lift the jar slightly by the lid. It should be well sealed. Your food is ready for storing (store without metal screw bands).

Shopping Cart Checkout