All American Pressure Canner Replacement Covers
Genuine All American Pressure Canner Replacement Covers
Replace a damaged or worn cover and get your All American Pressure Canner back in service. Replacement All American Canner lids are available for models 910, 915, 921, 925, 930, and 941.
Three cover sizes — choose carefully:
• Model 910 — its own cover
• Models 915, 921, 925, 930 — shared cover
• Model 941 — its own cover (also uses more clamps)
Cover only (no parts): Choose this if your regulator, gauge, clamps, and hardware are still serviceable. Metal cover only — no parts included.
Complete cover with parts: Includes hardware for a ready-to-install repair.
Verify your model number before ordering to ensure correct fit.
(No Parts) All American Pressure Canner Replacement Covers
No-parts replacement covers are designed for customers who only need the metal cover and plan to reuse compatible parts from their existing canner. This can be a cost-effective way to restore a canner when the cover itself is the main issue, but the remaining components are still in good condition.
All American pressure canners use three different cover sizes, so it is important to select the correct replacement cover for your specific model:
• Models 910 use their own cover size
• Models 941 use their own cover size
• Models 915, 921, 925, and 930 all share the same cover size
If your regulator weight, vent pipe, gauge, handle, clamps, screws and over-pressure plug are still serviceable, a metal-only replacement cover may be the right option.
Please note: Metal cover only, no parts included. You must supply or purchase any parts needed to complete the cover.
All American Pressure Canner 910C Replacement Cover
Fits All American Pressure Canner model: 910
All American Pressure Canner 915C Replacement Cover
Fits All American Pressure Canner model: 915
All American Pressure Canner 921C Replacement Cover
Fits All American Pressure Canner model: 921
All American Pressure Canner 925C Replacement Cover
Fits All American Pressure Canner model: 925
All American Pressure Canner 930C Replacement Cover
Fits All American Pressure Canner model: 930
All American Pressure Canner 941C Replacement Cover
Fits All American Pressure Canner model: 941
(With Parts) All American Pressure Canner Replacement Covers
Our complete replacement covers with parts provide a more comprehensive solution for canners needing more than just the metal cover. These assemblies include the key upper-cover components needed to rebuild the lid section of your canner and are a convenient option when original parts are worn, damaged, or missing.
All American pressure canners use three different cover sizes, so proper model matching is important:
• Models 910 use their own cover size
• Models 941 use their own cover size
• Models 915, 921, 925, and 930 all use the same cover size
Replacement covers with parts include the pressure regulator weight, vent pipe, steam gauge, Bakelite top handle, handle screws, retaining bayonet clamps, retaining bayonet screws, and over pressure plug. This can be one of the easiest ways to replace a damaged cover while also refreshing the entire upper assembly at the same time.
Please note: Metal cover plus all parts needed to make a complete replacement cover.
All American Pressure Canner 910CW Replacement Cover
Fits All American Pressure Canner model: 910
Includes these parts: Metal Cover, #68 Pressure Regulator Weight, #69 Vent Pipe, #72 Steam Gauge, #76 Bakelite Top Handle, (2) #77 Bakelite Top Handle Screws, (3) #78 Retaining Bayonet Clamps, (3) #79 Retaining Bayonet Screws, #2040 Over Pressure Plug.
All American Pressure Canner 915CW Replacement Cover
Fits All American Pressure Canner model: 915
Includes these parts: Metal Cover, #68 Pressure Regulator Weight, #69 Vent Pipe, #72 Steam Gauge, #76 Bakelite Top Handle, (2) #77 Bakelite Top Handle Screws, (3) #78 Retaining Bayonet Clamps, (3) #79 Retaining Bayonet Screws, #2040 Over Pressure Plug.
All American Pressure Canner 921CW Replacement Cover
Fits All American Pressure Canner model: 921
Includes these parts: Metal Cover, #68 Pressure Regulator Weight, #69 Vent Pipe, #72 Steam Gauge, #76 Bakelite Top Handle, (2) #77 Bakelite Top Handle Screws, (3) #78 Retaining Bayonet Clamps, (3) #79 Retaining Bayonet Screws, #2040 Over Pressure Plug.
All American Pressure Canner 925CW Replacement Cover
Fits All American Pressure Canner model: 925
Includes these parts: Metal Cover, #68 Pressure Regulator Weight, #69 Vent Pipe, #72 Steam Gauge, #76 Bakelite Top Handle, (2) #77 Bakelite Top Handle Screws, (3) #78 Retaining Bayonet Clamps, (3) #79 Retaining Bayonet Screws, #2040 Over Pressure Plug.
All American Pressure Canner 930CW Replacement Cover
Fits All American Pressure Canner model: 930
Includes these parts: Metal Cover, #68 Pressure Regulator Weight, #69 Vent Pipe, #72 Steam Gauge, #76 Bakelite Top Handle, (2) #77 Bakelite Top Handle Screws, (3) #78 Retaining Bayonet Clamps, (3) #79 Retaining Bayonet Screws, #2040 Over Pressure Plug.
All American Pressure Canner 941CW Replacement Cover
Fits All American Pressure Canner model: 941
Includes these parts: Metal Cover, #68 Pressure Regulator Weight, #69 Vent Pipe, #72 Steam Gauge, #76 Bakelite Top Handle, (2) #77 Bakelite Top Handle Screws, (4) #78 Retaining Bayonet Clamps, (4) #79 Retaining Bayonet Screws, #2040 Over Pressure Plug.
Why Choose Genuine All American Replacement Covers?
Need Assistance Finding the Right Replacement Cover?
Our team has years of experience with All American Pressure Canners and we're here to help.
Call 1-800-251-8824
Mon–Fri, 9:30am–5pm ET · Red Hill General Store, Hillsville, VA
Frequently Asked Questions
Answers drawn from years of customer questions — and from Erica, our pressure canning expert.
• Models 910 use their own specific cover
• Models 941 use their own specific cover
• Models 915, 921, 925, and 930 all share the same cover size
Before ordering, please verify your canner model to ensure you purchase the correct replacement cover.
All of our products are first quality and factory new. If you are not satisfied with any AllAmericanCanner.Com product you may return it within 30 days for replacement or refund. AllAmericanCanner.com is independently owned and operated by Red Hill General Store, Inc. We are not affiliated with Wisconsin Aluminum Foundry other than being an authorized retailer of their products. All American Pressure Canners are intended and manufactured for home use. They are not intended for commercial applications.